Onsite Recycling Services - Industrial and Health Care Recycling

Liquid Waste, Continuous Auto Repeat Processing. The waste in the dirty solution must be a liquid like oil or the solution must have a low percentage of solid waste as the waste passes through a drain from the distillation tank to a waste container.

• Tank Capacity: NA
• Speed: Up to 2.5 Gal/hour (10 litres/hour)
• Solvent Transfer: Auto-transfer, in and out
• Air Pressure: Min 85 PSI, unit complete with pressure regulator and filter
• Power Supply: 120V (L-Models), 240V (H-Models), 1500W
• Heater: 1500W
• Dimensions: 12 x 25.5 x 55" (WDH)
• Pump Vacuum: P-Models

• Recycles 18 gallons per batch
• No moving parts
• No odors
• Able to recycle complex solvents
• Multiple work stations available
• Clear, quality solvent
• Stainless steel design
• Class 1, Division 1, Groups C,D,E,F,G
• Safe for haz and non haz locations

• Vapor management system
• Locking safety lid
• Intrinsic protection & explosion proof enclosures
• 18 gallon capacity
• Draws only 20 AMPS· 240 VAC, Single PHASE, 50 or 60 Hz
• Distillation time 8 - 12 hrs
• Dimensions 82"L x 30.5"D x 67"H
• Weight: 470 lbs

• Recycles up to 48 Gallons per batch
• 4 - 6 hours Recycling time
• Up to 4 batches/day
• 85 - 100% Solvent Recovery Rate
• Stainless Steel Cabinet
• 40 C-200 C (100 F-390 F) Working Temperature
• 15 Kw
• Thermal Oil Heating
• Patent Pending 2 Cool Distillation System
• Fully Automated Electronic Controls
• Safety lid
• Fully automated with user Interface option
• All sequences controlled by the microprocessor
• Systematic fail-safe shutdown procedure on faults
• Auto Control Method
• Ergonomic Chamber Height

• Direct Filling Capability
• Patent Pending 2 Cool Distillation
• Anti Pressure System
• High Temperature Shut Off
• Vapor Management System
• ETL Rated Class 1, Div 1
• Closed System
• Available Vacuum Assist
• Low VOC'S
• Under unit components
• Patent Pending Vapor Management System
• 42 x 39 x 91
• Weight: 655 lbs
• 480v 50/60hz
• 34 Amps
• Patented, State of the art technology
• 2 Year On-Site Warranty

Solvents like mineral spirits and varsol are used to remove liquid waste like oil and grease from parts and equipment. OnSite Solvent Recyclers reclaim spent part washer solvents for reuse. When the unit has finished recycling, the operator drains the waste from the Distillation Tank into the waste container. The cost savings are dramatic. The purchase of solvent typically drops by over 95% and the waste hauling charge also drops by 95% or is eliminated if the waste is non-hazardous.

• Tank Capacity: 20 US Gal (80 litres)
• Speed: 20 US Gal in 8-12 hours
• Solvent Transfer: Auto-transfer, in and out
• Air Pressure: Min 85 PSI, unit complete with pressure regulator and filter
• Power Supply: 220/240V, 2200W, 9.3A
• Heater: 3400W
• Display: Digital LCD (16 characters) shows selected temperature set points in °F or °C

Through the solvent distillation process, the solvent is boiled to a vapor and then condensed back into a liquid, leaving the contaminant behind in the tank for recovery. Our solvent distillation recycling equipment has a tank with a specially designed bag liner, which contains the left-behind residues, is easily and cleanly removed. The collected solvents can be up to 99% pure.

• Available in 3, 6,17.5, & 55 Gallon Systems
• CSA listed to UL 2208, Class I Division 1 Group D (Hazardous and Non-hazardous Working Areas)
• 2 year Warranty
• Stainless steel solvent distillation recycling tanks are designed to facilitate easy and safe removal of solid residues.
• Electronic Control Panel
• One-touch Automated Cycle
• Digital Display
• Electronic Timer
• Electronic Thermostat
• Self-testing
• Continuous Solvent Recycling Monitoring & Troubleshooting Control
• Spring-loaded safety relief lid to prevent pressure buildup over 1.0 psi
• Electric thermal coils immersed in thermic oil jacket
• Suitable for most solvent distillation (not suitable for nitrocellulose). Call to review your specific equipment application.