Onsite Recycling Services - Automotive Recycling

• Recycles 5 gallons per batch
• No moving parts
• No odors
• Able to recycle complex solvents
• Multiple work stations available
• Clear, quality solvent
• Stainless steel design
• Class 1, Division 1, Groups C,D,E,F,G
• Safe for haz and non haz locations
• Vapor management system
• Process control method

• Anti-pressure system
• Direct condensation method
• Locking safety lid
• Intrinsic protection & explosion proof enclosures
• 5 Gallon capacity
• Draws only 8 amps 110 or 220 vac, single phase, 50 or 60 hz
• Fuse protection 8 - 12.5 amp delayed action
• Distillation time 8 - 12 hrs
• Operating temperature 53.6° F to 379.4° F
• Safety thermostats - ELEMENT: 384.8° F
• Dimensions 16.1"W x 24.4"D x 32.3"H
• Weight: 227 lbs

• Tank Capacity: 5.0 US Gal (20 litres)
• Speed: 5.0 US Gal in about 4 hours
• Solvent Transfer: Manual
• Air Pressure: Not applicable
• Power Supply: 110/120V, 1500W, 13.3A
• Heater: 1500W
• Display: LEDs indicate power on, heat on and 6 temperature set points

• Tank Capacity: 6.6 US Gal (25 litres)
• Speed: 6.6 US Gal in about 4-6 hours
• Solvent Transfer: Manual transfer
• Air Pressure: Not applicable
• Power Supply: 220/240V, 2200W, 9.3A
• Heater: 2100W
• Enhanced Control Features and Digital Display
• Easy settings for dryer waste residue
• Automatic or timed heater shut-off
• Maximum temperature set points in °F or °C
• Regulation of the rate of recycling using heating power percentage

Use the portable AC10NLPW to recycle dirty solvent from multiple Parts Washers. Transfer 10 gallons of dirty solvent to the AC10NLPW and transfer previously recycled clean solvent to the Parts Washer. Recycle and push the AC10NLPW to the next Parts Washer.

• Tank Capacity: NA
• Speed: Up to 2.5 Gal/hour (10 litres/hour)
• Solvent Transfer: Auto-transfer, in and out
• Air Pressure: Min 85 PSI, unit complete with pressure regulator and filter
• Power Supply: 120V (L-Models), 240V (H-Models), 1500W
• Heater: 1500W
• Dimensions: 12 x 25.5 x 55" (WDH)
• Pump Vacuum: P-Models

Modular, Two Units plus a Solvent Transfer System

• Automatic and Manual Paint Gun Cleaning
• Solvent Recycling with Solvent Transfer System
• Separate units can be operated together, as an integrated system, or independently
• Convenient Placement: the two units can be in separate rooms
• Pressure regulator and moisture filter
• Complete with corrosive resistant pails

Painters that prefer automatic cleaning, select the UG7500W. Spray guns are washed automatically using OnSite's effective water cleaner, AQUA-KLEENER PGC then rinsed with water and dried with air. The cleaner is recycled using a liquid recycler when dirty for continued use, minimizing consumption.

• Automatic and Manual Paint Gun Cleaning
• Solvent Recycling with Solvent Transfer System
• Pressure regulator
• Complete with corrosive resistant pails

Position the upper tray under the brake using swivel arm and telescopic post. Clean all heavy brake parts in the lower fixed tray using 3 air-powered cleaning guns: flow-through solvent brush gun, flow-through gun scraper and air blow gun.

• Cleaning Solvent can be aqueous or petroleum based
• 13 or 16 US gal solvent drum stored inside cabinet
• Stainless steel trays

Crush oil filters down to a height of 2 inches. Easy to use, just open the door, place filter on platform, close door, press start.

• Reclaim up to 95% of oil from used oil filter
• Reduce trash volume up to 75%
• Reduce management costs as dumpster is emptied less often

Easy to use:

• Load waste into easy access hopper until the compactor is full then compact
• To compact waste, pull lever. When compaction is finished, bale waste with conveniently attached baling twine. Compacting takes less than 60 seconds
• To crush pails - lower platform, open door, place pail on platform, close door, push lever to compact pail on up stroke. Crushing pails does not interfere with compacting trash

Features:

• Automatic Door Locking System for greater operator safety
• Low profile double action ram delivers 4,900 lb of compacting power
• Compacted bales weigh as little as 35 lb
• Capacity: 8 cu ft
• Bale size: 24.5 x 14.1 x 24.1" (Width x Depth x Height)
• Mobile - mounted on 4 inch, lockable wheels
• Heavy-duty construction and powder paint coating for rugged environment

Portable Pumping Station for Liquid Transfer. Air Operated Pumping Stations transfer liquid from one container to another. Ideal for dispensing liquid from an economical 55 gal drum to smaller, portable containers and consolidating liquid from several containers to one large drum. Liquid transfers leak free up to 3.0 US gal per minute.

• Portable - carry the small light weight Pumping Station from job to job
• Wall or table mounting
• Control solvent flow from the valve on the main unit or valve at the end of the discharge hose or use timer to automatically start and stop flow; timer ranges from 0-2 minutes